2 replies to this topic

[Luretryne]

I thought that we could have an thread for our i7 2600k Overclocking. Post our overclocks and settings and motherboard here.

My overclock:
Im using the sabertooth P67 now since it was the only mb I could get because of the P67 chipset failure all the other ones where not sold.

So I have been up in 4.7Ghz but I cant get it stable within the volts areas. I can have prime95 at run for hours but suddenly when im not doing anything stressful it crashes. Any tips?

But here is my dead stable at 4.3GHz
MB: Sabertooth P67
BCLK: 100
Turbo Ratio: 43
Load-Line Calibration: Extreme
VRM Freq: Auto
Phase Control: Extreme
Duty Control: T.Probe
CPU Volt: 1.270
CPU PLL Volt: 1.81250

Edited by Luretryne, 14 February 2011 - 10:19 PM.

[mihapiha]

I'd try everything auto first. Then raise only VCore and multiplier... Overclocking a SB CPU is not that much of a move...

[Luretryne]

mihapiha, on 15 February 2011 - 05:02 AM, said:

I'd try everything auto first. Then raise only VCore and multiplier... Overclocking a SB CPU is not that much of a move...

I did and it went unstable right away.